Villa irrigation Dubai is what Apex Landscape Works has specialised in since 2015 — complete villa irrigation system installation, design, and irrigation repair across Dubai and the wider UAE: residential villas, gated and open communities, any area. Sprinkler systems, drip irrigation, UPVC piping, automatic controllers, and pressure pumps, all under one team. For irrigation repair Dubai villa owners can rely on, our technician finds the real fault first, then fixes it.
We design and install complete automatic irrigation systems for villas throughout Dubai and across the UAE — gated communities and open plots alike, residential and select commercial sites. Whether you need a full new irrigation system for a bare garden, an upgrade to an existing setup, or repair of a system installed by another contractor, our team handles the full scope of irrigation work.
Zones that won't switch on or off, valve wiring faults, and valve box replacement.
After inspectionAutomatic irrigation timer and digital controller repair — reprogramming, wiring faults, and full unit replacement for Hunter and Rain Bird controllers.
After inspectionBroken or blocked sprinkler heads, cracked UPVC pipe joints, and leak detection across the full irrigation network.
From AED 50 / headBlocked or missing drippers on hedges, trees and planting beds replaced and flow-tested.
From AED 100 / 100 emittersZone-by-zone tracing of hidden underground leaks — the usual cause of an unexplained jump in your DEWA bill.
After inspectionFor villas with unclear or failing systems, we trace and diagnose the full irrigation network — zones, valves, controller wiring, and pipe runs — before quoting the repair.
Overhaul AED 2,000–5,000| Service | Price |
|---|---|
| Sprinkler head replacement | from AED 50 per head, plus visit charge |
| Drip emitter replacement | from AED 100 per 100 emitters, plus AED 300 visit charge |
| Irrigation inspection | AED 500 |
| Irrigation leak detection (zone-by-zone) | on request after inspection |
| Solenoid valve repair or replacement | on request after inspection |
| Controller / timer repair or replacement | on request after inspection |
| Full system overhaul | AED 2,000–5,000 |
| New system design & installation | on request after site visit |
Final pricing depends on garden size, number of zones, existing system condition, and site access. The inspection is charged because our technician tests the system and finds the actual fault — you get a clear diagnosis, not a guess. Every job is quoted in writing before work starts. See all services & prices.
A sudden spike in your DEWA water bill is one of the clearest signs of a hidden irrigation leak. Villa gardens are especially vulnerable — an underground irrigation pipe or a stuck solenoid valve can leak for weeks without any visible sign above ground, quietly running up thousands of dirhams before anyone notices. Real cases in Dubai villa communities have seen bills spike into the tens of thousands of dirhams from a single undetected underground leak.
Unlike general plumbing leak detection companies, we specialise specifically in irrigation system leak detection — tracing the fault through the full tank-to-sprinkler chain, not just household plumbing. If you've received a DEWA High Water Usage Alert, or noticed your bill has risen without a clear reason, we inspect your irrigation network zone by zone to find and fix the source.
Because a full villa system is a chain — tank, pump, timer, wiring, solenoid valve, piping — a single symptom can have several possible causes further up or down the line. A zone that won't shut off could mean a solenoid valve stuck open from mud or debris, a wiring fault at the timer sending the wrong signal, a weak timer battery failing to hold a clean instruction, or a valve itself physically damaged. The same visible symptom — a stuck zone, a dry patch, a bill spike — can trace back to completely different points in the system, and testing each stage correctly requires proper diagnostic equipment and experience with exactly this fault chain, not guesswork.
This is exactly the diagnostic process our team runs on every irrigation call-out — testing the timer signal, the solenoid valve response, and the pipe network in sequence to isolate precisely where the fault sits, rather than replacing parts speculatively. Over ten years of hands-on villa irrigation work means we know which fault typically sits behind which symptom, and we test to confirm it rather than guess.
Understanding the system helps explain why irrigation faults are rarely simple to diagnose without the right equipment. A typical villa automatic irrigation system runs as a connected chain: water is drawn either from a dedicated irrigation water tank or directly from the villa's main water tank, pulled through by a pump. That pump connects to a central control panel and timer — usually Hunter or Rain Bird — which sends an electrical signal down to a solenoid valve for each zone at the scheduled time. The solenoid valve is what physically opens and closes to release water into that zone's piping and sprinklers or drippers. Smaller gardens sometimes use a battery-operated tap timer instead — a self-contained timer unit suited to a small, defined area.
Before any pipe goes in the ground, a correctly designed system saves you money and prevents future faults. Our irrigation design service covers zone planning (separating grass, planters, and trees into correctly grouped zones), sprinkler and dripper layout matched to your garden's shape, pipe sizing calculated for your water pressure and flow rate, and controller programming suited to each zone's watering needs. This applies whether you're planning irrigation for a bare new garden or redesigning a poorly performing existing system — and it's built into every villa landscaping project we do.
We design sprinkler layouts matched to your garden's shape and grass type, with sprinkler heads selected for the correct throw radius — typically 3 to 5 metre diameter coverage per head, overlapped correctly so no area of lawn is under-watered or over-watered. Pop-up sprinkler heads are used for open lawns, while shrub-riser heads suit planted beds. All systems are zoned separately from drip irrigation, since grass and planting have different watering needs. Ideal for natural grass lawns such as Bermuda and Paspalum.
Drip irrigation delivers water directly to the root zone of trees, hedges, shrubs and planting beds through drip lines, drippers and emitters — using far less water than sprinklers and keeping walls, paving and leaves dry. We size and space emitters by plant type, and hard-water blockage is the most common drip fault we repair. Best suited to soft landscaping areas.
For pipework we use high pressure UPVC pipes — mostly Class E, and Class D where system pressure requirements allow — from Atlas and other trusted UAE suppliers, selected specifically for durability and pressure reliability in Dubai's climate and hard water conditions. Correct pipe class selection matters: undersized or wrong-class pipe is one of the most common causes of pressure loss and pipe bursts in villa irrigation systems.
We install and repair digital irrigation controllers from Hunter and Rain Bird — the two leading brands in the UAE market — programmed with zone-specific watering schedules suited to Dubai's seasonal heat changes. Automatic controller installation means your system runs on a set schedule without manual intervention, adjusting easily as the seasons change.
Smart irrigation: we also install Wi-Fi smart controllers from the same brands, so you can check, pause or adjust your watering from your phone — useful for owners who travel or rent out their villa, and an easy way to cut water waste in winter.
The solenoid valve is the component that switches each irrigation zone on and off — a common failure point in villa systems. We repair and replace faulty solenoid valves, solenoid valve caps, and valve box fixings, and diagnose valve wiring faults back to the controller. A solenoid valve stuck open or closed is one of the most common reasons for a "zone won't turn off" or "zone won't turn on" irrigation complaint.
For villas with low mains pressure or larger gardens needing consistent coverage, we install and service pressure pumps to boost irrigation performance, along with the correct pipe sizing to carry that pressure without leaks or joint failure.
Dubai's harsh climate and hard water quality put significant stress on irrigation systems. Most villa systems need repair or maintenance every 1 to 2 years due to hard water mineral deposits blocking drip emitters and sprinkler nozzles, UV degradation of exposed pipe and fittings, and root intrusion from nearby trees cracking pipe joints. If you notice reduced pressure, dry patches, a zone that won't shut off, or a controller not responding, contact us before the problem causes further damage to your garden. Regular garden maintenance catches these faults early.
For public parks, medium-to-large open grounds, and green spaces too large for standard villa-scale pop-up sprinklers, we design and install rotary irrigation systems. Rotary sprinkler heads rotate a stream of water across a wider radius than fixed pop-up heads, covering more ground per unit with efficient, even distribution — the standard choice for park lawns, roundabouts, and open community green spaces.
For football pitches, cricket grounds, and other large-scale sports fields — a different scale of area entirely from a public park — we design and install irrigation using Nelson Big Gun sprinklers. These are high-volume, high-pressure rotary units built for very large, open playing surfaces, with a long throw distance that covers a full pitch with far fewer sprinkler heads than a standard system would need. Available in full-circle or part-circle rotation with adjustable trajectory, Big Gun sprinklers are not used for public parks or villa gardens — they're built specifically for sports-field-scale coverage.
This is the same Nelson Big Gun sprinkler technology we installed as part of our football pitch construction work across the UAE between 2015 and 2021 — real large-scale experience now available for sports ground irrigation projects.
Beyond residential villa projects, Apex Landscape Works has installed complete irrigation systems, including water tanks, for 15 professional football pitches — 12 in Sharjah and 3 in Ras Al Khaimah — between 2015 and 2021. This large-scale commercial construction experience gives us deep technical expertise in high pressure systems, water tank installation, and complex irrigation network design — knowledge that directly benefits every residential villa irrigation project we undertake today. Read more about Apex Landscape Works or see our project gallery.
We provide irrigation installation and repair throughout Dubai and across the UAE — every community, gated or open:
We also serve Jumeirah, Jebel Ali, Al Barsha, Downtown Dubai, Bur Dubai, Deira, Silicon Oasis, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah, and Abu Dhabi. If your area isn't listed, message us on WhatsApp to confirm coverage.
It depends on garden size, number of zones, sprinkler and drip layout, pipe runs and whether a pump or tank is needed, so every new irrigation system installation in Dubai is priced after a site visit, with an itemised written quote.
Sprinkler head replacement starts from AED 50 per head plus a visit charge, drip emitter replacement from AED 100 per 100 emitters plus a AED 300 visit charge, and an irrigation inspection is AED 500. A full system overhaul is AED 2,000–5,000. Leak detection, solenoid valve and controller repairs are priced after inspection.
For most villas: pop-up sprinklers on the lawn, drip irrigation for trees, hedges and planting beds, each on its own zone, run by a Hunter or Rain Bird automatic controller on Class E UPVC pipe. A smart Wi-Fi controller is worth adding if you travel or rent the villa out.
Yes, we offer full irrigation design — zone planning, sprinkler and dripper layout, and pipe sizing — before any installation begins, ensuring the system is correctly designed for your garden from the start.
Both. We design and install complete new automatic irrigation systems, and repair or upgrade existing systems installed by other contractors.
Mainly Hunter and Rain Bird controllers and components — the two leading irrigation brands in the UAE market.
Hard water mineral build-up, wiring faults, and normal wear are the most common causes of a solenoid valve sticking open or closed.
High pressure UPVC pipe, mostly Class E and Class D depending on system pressure requirements, sourced from Atlas and other trusted UAE suppliers.
Yes, this is one of the most common causes. An underground irrigation leak or stuck solenoid valve can run for weeks without any visible sign, quietly increasing your water bill. We inspect your irrigation system zone by zone to trace and fix the source.
We specialise specifically in irrigation system leak detection — sprinkler zones, drip lines, and solenoid valves — rather than general household plumbing.
Yes, we provide irrigation installation and repair throughout the UAE, including Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah, and Abu Dhabi.
Most villa systems need repair or maintenance every 1 to 2 years due to hard water mineral deposits and UV degradation of components.
Irrigation not working, or a high DEWA bill?
Send a short video of the problem, your community and garden size on WhatsApp, or email info@apexlandscapeworks.com.